![]()
D-Link, an industry leader in networking, introduces the DP-301P+ Express EtherNetworkTM Fast Ethernet Print Server. The DP-301P+ is a compact print server that allows you to share your parallel printer on an Ethernet network. Free Download D-Link DP-301P+ (rev.A) Print Server Firmware. - 10/100 Mbps Fast Ethernet. It is highly recommended to always use the most recent driver version. Dp-301p+ Fast Ethernet Print ServerDP-301P Revision C1 1 Change CPU to RDC R2021D-Link DL7180 firmware is backward compatible to C1 2 Fixed SNMP communit DP-301P+ Firmware Release Note Firmware: v3.50 build 1 (file name: dp301p_v350_build_1.bin) Hardware: C1/D1 Date: Jan. 13, 2006 Upgrade Information: 1. Change CPU to RDC R2021(D-Link DL7180), firmware is backward compatible to C1. Fixed SNMP community name -- can input 32 characters. Fixed adding network printer with UPnP IP. D-Link DP-301P+ Revision D1 Download Drivers, Manual and Firmware. Pocket-size The DP-301P+ print server is a compact. Auto-sensing 10/100Mbps Fast Ethernet. ![]() Checking 'DNS address' and 'Print Server e-mail address' if blank under e-mail notification testing. Support MAC 0S 10.3 or above IPP Printing. ABOUT THIS GUIDE......... 1 What’s Not Covered in This User’s Guide....... 1 Contents of the User’s Guide......... 2 INTRODUCTION......... 3 Background on Print Servers......... 3 D-Link Print Server Administration Features...... 6 INSTALLING AND STARTING THE PS ADMIN PROGRAM.. 8 System Requirements.......... 8 Installing PS Admin........... 9 Starting PS Admin........... 11 GETTING STARTED SETTING UP YOUR PRINT SERVER.. 13 Choosing a Name for Your Print Server....... 13 Setting a Password for Your Print Server...... 15 Changing Print Server Port Settings....... 17 Testing Your Print Server.......... 20 SETTING UP NOVELL NETWARE 3.X PRINTING... 22 Introduction to Novell NetWare Printing...... 22 Print Server Setup Procedure......... 26 Remote Printer Setup Procedure........ Setting up Windows 95 TCP/IP Printing The D-Link network print server can provide print services to TCP/IP networks using the lpr/lpd network printing protocol. Most UNIX systems are capable of supporting lpd, as is Windows NT. D-Link’s LPR for TCP/IP Printing client gives Windows 95 workstations the ability to print using the lpr/lpd printing protocol. Though it is possible to print to D-Link network print servers from Windows 95, this capability is useful if primarily administer your network from UNIX systems, or if you want to print from workstations that are only accessible through IP routing. Installing the LPR for TCP/IP Printing Client Before your Windows 95 workstation can print using the lpr protocol, you will need to install the D-Link client program, as follows: 1. Make sure that you have installed the TCP/IP protocol, and have properly configured the Windows 95 TCP/IP settings. You can install the protocol from the Network control panel if necessary. D-link Fast Ethernet Print Server Dp-301p+ Driver DownloadFrom the Start menu, choose the Settings submenu, then the Control Panel item within it. Windows will display the Control Panel folder. Double-click on the Network icon in the Control Panel folder. Click on the Add. Button on the Configuration tab. Windows will ask for the type of component to add. Select Client and click Add. When Windows asks you to select a network client, click the Have Disk. Insert the LPR client diskette in your computer’s floppy drive (A: or B:), enter the proper pathname, and click OK. Select the LPR for TCP/IP Printing client and click OK. Windows will copy the necessary files, and return to the Network dialog. Click OK to let Windows restart. Adding LPR Printer Ports Once you have installed the client, and have enabled TCP/IP printing for the D-Link network print servers, then you need to add a printer port for each printer you will be printing to using the lpr/lpd protocol. To add a printer port, 1. From the Start menu, choose the Settings submenu, then the Control Panel item within it. Windows will display the Control Panel folder. D-link Dp-301p+ Fast Ethernet Print ServerDouble-click on the Network icon in the Control Panel folder. Choose the LPR for TCP/IP Printing client and click the Properties button. How to Install D-Link Print Server in the Microsoft Windows 2000 TCP/IP environment To create a TCP/IP remote printer Microsoft TCP/IP printing support must be installed. Ethernet Print Server ParallelThe procedure is as follows. To start the Add Printer Wizard, select Settings - Printers from the Start menu and doubleclick on the Add Printer icon. The Wizard asks you to select between Local printer and Network printer. Select Local printer (Disable Automatically detect my printer), as the DP-100/101/300/301/301P emulates a local printer port. The Wizard asks you to select between Use the following port and Create a new port. Select Create a new port. Then Select Standard TCP/IP port and click Next.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2018
Categories |